2005613_a•en•2017-09-01
We reserve the right to carry out improvements
11
Sensor Splitter
3.1 Mounting the device
The devices are designed for installation in a distributor. They are to be
mounted in a dry and readily accessible location. The devices absolutely
must not be mounted outdoors and must not be subjected to direct sunlight.
Please observe the cable types recommended in the wiring diagrams.
When installing the devices in a distributor, they must be mounted on a sym-
metrical DIN rail (35 mm as per DIN EN 50022).
The minimum distance between the terminals and another object equals
10 mm.
The devices can be mounted by simply clipping them onto the DIN rail.
Fig. 2
Sensor splitter in a 3 MW DIN rail-mounted housing
60 mm
95 mm
90 mm
54 mm
3 TE
60 mm
Fig. 3
Dimensions of 3 MW DIN rail-mounted housing
