Service
Cleaning the weather station (if available)
INFO
The weather station must be cleaned every three months to ensure the measured values are accurate and ensure
operating safety and reliability.
Note the separate instructions for the weather station.
Remove dirt from the transparent cover of the weather
station. Use a damp cleaning glove for this purpose.
Blow out the opening for the wind measurement. Do not
introduce pointed objects.
Inspection activities/examine the product during cleaning
INFO
Wear and damage to the operating element or product as well as damage to the mounting substructure may impair the
product and result in secondary damage.
If you should notice any irregularities during the visual check of the product, proceed as described below.
Take the product out of service.
Have any damage repaired by a qualified specialist.
Check the product regularly for visible wear, damage and proper functioning (visual check).
Check that the fixing of the supporting elements (e. g. consoles) is firmly connected to the structure (visual check).
Check the traction cable for wear, e. g. fraying (visual check).
Remove all foreign objects and any soiling from the product components .
Check the charge status of the batteries of supplementary accessories, such as the hand-held radio transmitter and wind
sensor, and replace if necessary.
Over the winter, pack the retracted sun sail in its protective cover.
INFO
To ensure proper functioning and your continued enjoyment of the product, WAREMA recommends professional
maintenance.
Information on this can be obtained from your WAREMA contracting partner or at
5.2
Maintenance
The maintenance tasks must only be performed by a qualified specialist. We recommend signing a service agreement.
Service is a preventative maintenance and contributes to keeping a product functional as long as possible.
Page 18 | 24
2051205 [Rev. 3 - en]/2021-12-08
