Introduction
1
Introduction
1.1
Information on safety
It is important to follow these instructions in the interests of personal safety. Failure to comply with these instructions when
operating the product may result in personal injury and/or property damage. Failure to comply with these instructions relieves
WAREMA of liability.
Warnings are marked in the instructions with this symbol or a similar symbol.
Anleitung vor dem Gebrauch des Produktes durchlesen!
Sicherheits-, Bedien- und Wartungshinweise beachten!
Include these instructions when passing the product on to a new owner.
Keep the instructions for use until you dispose of the product.
1.2
Information on the target group and application of these instructions
Target group
These instructions are directed at people who operate, care for and/or maintain the product.
The activities listed in the "Maintenance" chapter are only permitted to be executed by a qualified specialist.
Contents
These instructions are an integral part of the following product:sun sail Sonea
The instructions contain important information on the operation, care and maintenance of this item. They describe how to
operate products with WAREMA standard drives. Other drives and special solutions are not dealt with.
Permissible activities
Performing tasks on the product that are not described in these instructions is not permissible. No other alterations, additions,
conversions or maintenance work is to be carried out on the product other than as described in these instructions without the
written approval of WAREMA.
1.3
Explanation of signal words
DANGER
Identifies an imminent danger that may result in death or serious injury.
WARNING
Identifies a potential danger that may result in death or serious injury.
CAUTION
Identifies a potential danger that may result in light injury.
NOTICE
Identifies a potential situation that may result in product or property damage.
1.4
Basic safety instructions
The safety instructions and warnings described here are intended to safeguard your health and to protect the product. These
instructions must be read carefully and followed.
Damage resulting from inappropriate use or the failure to follow these instructions is not covered by the warranty. Liability will
not be accepted for secondary damage.
General operation
The operation of a faulty product may injure persons and/or damage adjacent parts.
Only operate the product if it is in technically perfect condition.
If the product makes unusual noises or movements, stop using it immediately and inform a qualified specialist.
2051205 [Rev. 3 - en]/2021-12-08
Page 3 | 24
