background image

Introduction 

[B2000171_1] - EN / 20.12.11 

Page 3 of 12 

Subject to change without notice. 

1

 

Introduction 

1.1

 

Information on safety 

It is important to 

follow these instructions

 in the inter-

ests of 

personal safety

. Failure to comply with these 

instructions when operating the product may result in 

personal injury and/or property damage

. Failure to 

comply with these instructions relieves WAREMA of liabil-
ity. 

 

 

Warnings are marked with these symbols in 
the instructions. 

 

 

Read through the instructions carefully 

before

 use. 

 

Keep the instructions for use until you 
dispose of the product. 

 

Include these instructions if you pass the 
product on to a new owner. 

 

Please observe all safety, operating and 
maintenance instructions. 

 

1.2

 

Information on the target group and 
application of these instructions 

Target group 

These instructions are directed at people who operate, 
care for and/or maintain the product. 

Contents 

These instructions are part of the operating manual and 
are an integral part of this product. The instructions con-
tain important information on the operation, care and 
maintenance of this item. They describe the operation of 
black-out blinds with ZIP guidance and motor operation. 
Other drives and special solutions are not dealt with. 

Permissible activities 
No

 other alterations, additions, conversions or mainte-

nance work are to be carried out on the product other than 
as described in these instructions without the written ap-
proval of WAREMA. 

1.3

 

Explanation of symbols and signs 

Safety information and symbols are contained in the ap-
propriate parts of the text. 

 

Symbol 

Use/explanation 

 

DANGER 

Identifies an imminent danger that may 
result in death or serious injury if not pre-
vented. 

 

WARNING 

Identifies a potential danger that may result 
in death or serious injury if not prevented. 

 

CAUTION 

Identifies a potential danger that may result 
in minor injury or property damage if not 
prevented.

 

 

Read the instructions for use and mainte-
nance. 



Note 

Important information on how to proceed 
and on the content of these instructions.

 



Activity/step 

List 

 
 

Summary of Contents for VDA-ZIP













Reviews:

Related manuals for VDA-ZIP