Product information
[B2000171_1] - EN / 20.12.11
Page 5 of 12
Subject to change without notice.
NOTE
Tab. 1 is a summary of the data for the motors that
can be used with this product. For specific infor-
mation, refer to the setting instructions included for
the motor.
Accessories
A wide range of control devices is available for our sun
shading control systems to give you optimum control of
the product.
2.3
Intended use
The black-out blind with ZIP guidance is a sun shading
system that may only be used for the intended purpose
(e.g. protection against heat and glare and to provide
visual privacy). Inappropriate use may result in significant
danger.
Additional loads on the black-out blind in the form of hang-
ing objects could damage the product or cause it to de-
tach from the wall and are therefore not permitted.
The intended use also includes observing these instruc-
tions and the care and maintenance conditions.
2.4
EC conformity
The EC conformity is certified, and the corresponding EC
declaration of conformity (see Chapter 9/p. 11) is part of
these product-specific operating and maintenance instruc-
tions. In order to maintain this condition and ensure safe
operation, you as the operator are obliged to observe the
instructions for use and maintenance.
Name:
WAREMA Renkhoff SE
Year of declaration of conformity:
2011
Head office:
Hans-Wilhelm-Renkhoff-Straße 2
97828 Marktheidenfeld
Germany
Standard
:
DIN EN 60335-2-97
Product:
Black-out blind
Intended use
For inside installation
Noise emission level
1
:
< 70 dB (A)
1
In a standard installation of the black-out blind on a
test stand, the noise emission level is <70 dB(A).
This value may vary depending on the installation.
