Maintenance/Warranty/repair/dismantling
[B867213_0] - EN/ 25.09.09
Page 8 of 12
Subject to change without notice.
5.3
Maintenance of the roller blind
The product
must
be main-
tained regularly and at least
once a year.
Inspection and maintenance
work is only to be carried out
by an appropriately qualified
specialist. We recommend you
take out a maintenance
agreement with a qualified
specialist.
DANGER
Risk of injury through irregular maintenance!
Check the unit regularly for signs of wear
and damage, e.g. on the motor line.
Do not use systems in need of repair.
DANGER
Electric shock!
When inspecting or maintaining electrical parts,
the power connection must be de-energised
and locked out.
Check the product for visible wear, for damage to
the motor line and to ensure it is securely attached
(e.g. check that screws have a firm hold).
Check the function and the switch-off points on the
product.
Replace the battery in units with remote controls.
6
Warranty
Subject to the statutory period of limitation for warranty
claims. This requires regular maintenance. The warranty
does not include wear parts or optical changes in line
with the type of material used (e.g. bleaching of surfaces
caused by UV rays).
Wear parts are
Bearing parts
Runners/sliders
Lifting tapes
7
Spare parts/repairs
CAUTION
Personal injury or property damage resulting
from inappropriate repairs.
The product should
only
be repaired by a
specialist.
To ensure that your roller blind will operate properly on a
continuous basis and to avoid changing its approved
status, use WAREMA spare parts only. Please contact a
qualified specialist for further information.
8
Dismantling/disposal
CAUTION
Personal injury or property damage resulting
from inappropriate disassembly.
The product should
only
be dismantled by a
specialist.
Disassembly and re-installation of the product
must
be
undertaken by a qualified specialist in accordance with
current guidelines and standards. Be sure to ask the
manufacturer for any missing documents before com-
mencing disassembly or re-installation.
Should the product no longer be required, ensure that it
is disposed of correctly in accordance with the relevant
regulations.
