890557_d•en•01.07.2014
We reserve the right to carry out improvements
9
2.2 Intended use
For each channel, the Wisotronic enables the connection of one conventional
sun shade drive with a single-phase AC motor. Alternatively, multiple sun
shade drives can be connected via motor control units.
WDEAIAN
Please obtain the approval of the manufacturer if you have questions
regarding the connection of devices not listed in these instructions.
All control devices are intended to be installed
indoors
unless otherwise
specified.
CDAUIOA
When using window drives, the installer of the system must ensure that
the safety regulations and precautions of DIN EN 60335-2-103 "Special
requirements on drives for gates, doors and windows" as well as ZH 1/494
"(German) guidelines for power-operated doors, windows and gates" are
observed.
WDEAIAN
The Wisotronic may only be used to control such window drives where the
movement of the window cannot cause any injuries!
These windows include (partial list), according to DIN EN 60335-2-103:
Windows with moving parts located at least 2.5 m above the floor or other
access levels.
Windows with drives equipped with an external or internal entrapment protec-
tion system.
Windows with an opening speed that does not exceed 50 mm/s when
moving between 15 mm and 50 mm away from the closed position, with a
maximum opening width of 200 mm and with a closing speed that does not
exceed 15 mm/s.
WDEAIAN
The approval of the manufacturer must be obtained for uses outside of the
purposes listed here. The consequences of unintended use may include
personal injuries of the user or of third parties as well as property damage
to the control itself, to connected devices or moveable mechanical parts
of the entire system.
Therefore, use our product only as intended.
Safety instructions
