5
2018114_b•en•2019-10-01
We reserve the right to carry out improvements.
Step 2:
Copy a channel from a WMS Central transmitter to a
WMS Wall-mounted transmitter basic
Select the "Allocate channel to another control panel"
menu item on your WMS Central transmitter under:
Main menu
Products
Product type
Context menu
Allocate
Allocate channel to another channel
Briefly press the learn button
on the WMS Wall-
mounted transmitter basic.
The transmission LED
on the WMS Wall-mounted
transmitter basic flashes green.
The channel was copied.
The exact description of these procedures can be found
in the instructions of the WMS Central transmitter (art. no.
890 405).
CExample 3:
Cn existing system with a WMS Wall-mounted
transmitter basic is expanded to include another
WMS Wall-mounted transmitter basic
Step 1:
Cdd the WMS Wall-mounted transmitter basic (2) to the
existing network with a WMS Wall-mounted transmitter
basic (1)
Button/
display
Cction/result
Wake up the WMS Wall-mounted transmitter
basic (1) with the STOP button
.
Wake up the WMS Wall-mounted transmitter
basic (2) with the STOP button
.
Press the learn button on the WMS Wall-
mounted transmitter basic (1) for approx.
5 seconds.
+
lights up green; the transmission LED
flashes. For several seconds, the WMS
Wall-mounted transmitter basic (1) scans
the range for devices.
The WMS Wall-mounted transmitter basic (1)
does not find any device during scanning:
The transmission LED
lights up.
ORANGE:
No receiver found.
If the WMS Wall-mounted transmitter basic (1)
finds a receiver, transmitter or sensor that has
not yet been learned in, scanning is stopped.
It is indicated as follows:
The transmission LED
lights up.
RED:
New
receiver
When you press the control button
,
you can check WHICH target device was
just found.
The product then waves and the control
function LED
flashes
.
RED:
The target device (transmitter
or sensor) can be added to the
network.
Press the STOP button
.
The found target device (transmitter or
sensor) is added to the network.
The target device waves in confirmation.
Briefly press the learn button
to leave
the learn mode.
Step 2:
Copy channel from one WMS Wall-mounted transmitter
basic (1) to another WMS Wall-mounted transmitter
basic (2)
Button/
display
Cction/result
Briefly press the learn button on the WMS
Wall-mounted transmitter basic (1).
The L LED
lights up green.
Briefly press the learn button on the TARGET
TRANSMITTER (WMS Wall-mounted
transmitter basic 2).
The L LED
lights up green.
The transmission LED
on the WMS
Wall-mounted transmitter basic (1) flashes
GREEN During the transmission of data
from
the
WMS
Wall-mounted
transmitter (1) to the WMS Wall-
mounted
transmitter
(2);
this
ends
with
GREEN Lights up continuously for
2
seconds,
transmission
successful
RED
Light up continuously for
2
seconds,
error
during
transmission
The L LED
on the WMS Wall-mounted
transmitter basic (1) and (2) goes out.
CExample 4:
Uhe existing system with a WMS Wall-mounted
transmitter basic is expanded to include a WMS
Hand-held transmitter comfort
Step 1:
Cdd the WMS Hand-held transmitter comfort to the
existing network with a WMS Wall-mounted transmitter
basic
Button/
display
Cction/result
Wake up the WMS Wall-mounted
transmitter basic with the STOP button
.
Wake up the WMS Hand-held transmitter
comfort with any
product button.
Press the learn button on the WMS Wall-
mounted transmitter basic for approx. 5
seconds.
+
lights up green; the transmission LED
flashes. For several seconds, the WMS
Wall-mounted transmitter basic scans the
range for devices.
The WMS Wall-mounted transmitter basic
does not find any device during scanning:
The transmission LED
lights up.
ORANGE:
No receiver found.
If the WMS Wall-mounted transmitter basic
finds a receiver, transmitter or sensor that has
not yet been learned in, scanning is stopped.
It is indicated as follows:
The transmission LED
lights up.
RED:
New
device
