UK Wiring Instructions
This Waring appliance is supplied with a BS 13 amp
moulded (fused) mains plug on the supply lead.
Should it be necessary at any stage to remove this moulded
plug and replace it with a re-wireable BS 13 amp mains
plug, the re-wiring should be completed as follows:
Class I (1)
The wires in the mains lead are coloured in accordance with
the following code:
Blue = Neutral
Brown = Live
Green & Yellow = Earth
As the colours of the wire may not correspond with the
coloured markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal in the plug which is marked with the letter N
or coloured black.
The wire which is coloured BROWN must be connected to
the terminal which is marked with the letter L or coloured
red.
The wire which is coloured GREEN & YELLOW must be
connected to the terminal in the plug which is marked with
the letter E or or coloured green or green and yellow.
With this appliance, if a 13 amp plug is used, a 13 amp fuse
should be fitted. If any other type of plug is used, a 10 amp
fuse must be fitted, either in the plug or at the distribution
board.