6
MMB150 OPERATION
Follow steps 1–3 above.
4. This blender is equipped
with an electronic membrane
keypad. The keypad has hi,
Lo, stop and Pulse buttons.
Always use hi speed for
crushing ice.
5. For continuous operation, press either the Lo or hi
button. When finished blending, press stop. For
momentary operation, press the Pulse button; motor
willrunonHispeeduntilthebuttonisreleased.Green
LED light will blink while in operation.
NoTE: This blender utilizes a slow start
™
feature. When
beginning hi or Lo operation, the unit will start in a lower
speed for 3 seconds and then switch to the full selected
speed. Pulse utilizes a 1-second slow start
™
. This allows for
a more even blending of ingredients in container.
6.
Allow motor to come to a complete stop before
removing container from blender base. Never place
the container on the motor base or remove it from
the motor base while motor is running.
7. Always hold container with one hand when starting and
while blending.
Never operate without jar lid.
8. Wash and dry container after each use. see Cleaning
and sanitizing instructions.
9. Unplug to turn off all power to blender.
MMB160 OPERATION
Follow steps 1–3 in the
MMB145 operation section.
4. This blender is equipped
with an electronic membrane
keypad. The keypad has hi,
Lo, stop and Pulse buttons,
