Quick Start Guide
IMPORTANT!
Do not throw away these instructions. READ BEFORE OpERAtING your new
Waring pro
tM
Espresso Maker. Keep for further reference.
these helpful hints are intended to be a supplement to the Instruction Booklet. In
order to ensure safe operation and optimum performance, please read the entire
Instruction Booklet.
©2012 Waring Consumer products 12WR131331 pG-29864
the steam function. The steam function
indicator lamp (H) and boiler temperature
control lamp (G) will turn on. When the
boiler temperature control lamp turns
off again, the machine is at the right
temperature to make steam.
Put the steam/water wand (E) into a frothing
pitcher filled with milk and pull the steam/
water dispensing lever (D) forward. Milk will
begin to froth. CAUTION: DO NOT direct
the steam/water wand toward any parts of
the body.
Hot Water Function
Be sure that the Control lever (C) is in the
vertical standby position and that the
machine has been heated for at least 5
minutes. Place container underneath the
steam/water wand (E) and pull the
steam/water dispenser (D) forward. To stop
the flow of hot water, push the dispenser
back to the vertical standby position.
(continued)
