0
Installing and Replacing Oven Light
A. Removing the Oven Light Cover
1. Insert a Phillips-head screwdriver into the slot in
the screw that holds the oven light cover in place.
. Rotate the screwdriver counterclockwise to
remove the screw.
3. Remove the oven light cover.
B. Install or Replace the Oven Light
Use a 10V/15W, clear appliance light bulb or phone
Waring Customer Service at 1-800-49-7464 to order a
light bulb.
C. Replace the Oven Light Cover
1. Insert the tab of the oven light cover into the slot
in the side of the oven light compartment.
. Insert the screw into the hole in the oven
light cover.
3. Holding the screw, push the oven light cover
toward the side of the oven until the screw
enters the screw hole.
4. Turn the screw clockwise by hand until the
threads start to engage.
5. Insert the screwdriver in the slot of the screw.
6. Tighten the screw by turning the
screwdriver clockwise.
Tab of Oven Light Cover
Slot of Oven Light Compartment
Oven Light Cover
Phillips Head Screw
