11
Two Pushers for Feed Tube
The large pusher is for processing larger vegetables. The smaller pusher nests in the larger pusher and
can be used for smaller vegetables, guiding long thin vegetables for more precise cuts and for jobs like
slicing pepperoni.
Large pusher
Insert the small food pusher into the large food pusher opening. Now you are ready to insert the large
pusher into the feed tube opening. There is a T-shaped insert on the back of the large pusher. Align
this with the T-shaped hole on top of the interlock tower. Push the pusher into the feed tube gently.
The insert will activate the interlock mechanism and your food processor is ready to operate.
NOTE: The pusher must be in place correctly, with the pusher’s safety interlock tab firmly engaged,
for the food processor to operate. This is an important safety feature.
Small pusher
To use the small pusher, lift it up and out of the large pusher. When using the small pusher, the large
pusher becomes the feed tube for the small pusher.
DISASSEMBLy OF CONTINUOUS FEED CHUTE PARTS
ALWAyS UNPLUG THE CORD BEFORE DISASSEMBLING.
• Turn the chute and cover clockwise until the safety interlock tabs are disengaged from the base.
When you rotate the chute, you will also disengage the chute’s locking slots from the locking tabs on
the motor base platform.
• Remove the large food pusher from the feed tube to disengage interlock. Remove the small
pusher from the large pusher.
• To remove an accessory disc from the continuous feed chute, place two fingers under each side
of the disc and lift it straight up. Be careful not to touch the blades, as they are extremely sharp.
• Remove the continuous feed chute from the motor base. If the chute is pointing in the 4 o’clock
position, just lift it up.
