FITTING THE FILTER
Important!
Never use the ash vacuum without
the filter!
Always ensure that the filters are
perfectly secure.
Assembly / Dismantling of the filter
Push the filter cartridge (10) on the appliance
head (3)
Dismantle the filter in the reverse order
REPAIRS
Only use accessories and spare parts
recommended by the manufacturer. If the
equipment should fail some day in spite of our
quality controls and your maintenance, only have it
repaired by an authorized electrician.
TECHNICAL DATA
ABID20L-1200BF
Mains voltage
220-240V ~ 50 Hz
Current consumption
1200W
Vacuity 17 kPa
Container capacity 20 litres
Hose
1000 mm
Diameter
38 mm
Aluminium pipe 230 mm
Diameter
28 mm
Weight
3.62kg
ABID20L-1201BFW
Mains voltage
220-240V ~ 50 Hz
Current consumption
1200W
Vacuity 17 kPa
Container capacity 20 litres
Hose
1000 mm
Diameter
38 mm
Aluminium pipe 230 mm
Diameter
28 mm
Weight
4.06kg
Weighted root mean square acceleration according
to relevant standard. : < 2.5 m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
MAINTENANCE AND CARE
- Stop the cleaner.
- Disconnect the mains plug from the power supply.
- Disconnect metal hose, aluminium pipe and
container apart.
- Clean enter connector, metal hose and aluminium
pipe and keep them unblocked.
- Use a damp cloth to clean the plastic parts.
- Empty container, tap the deposits to loosen them
and, if necessary, wash it.
- Brush dust on washable filter and, if necessary,
wash it.
- Do not use cleaning products, solvents or sharp
objects for this purpose.
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-
sales service department.
_
If replacing the power cord is necessary, it
should be done by the manufacturer or his agent
to avoid a hazard.
AFTER-SALES SERVICE AND APPLICATION
SERVICE
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found
under:
www.eco-repa.com
WARM TECH application service team will gladly
answer questions concerning our products and their
accessories : sav@eco-repa.com
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don’t keep it in plastic bags to avoid humidity
build-up.
GUARANTEE
Refer to the enclosed guarantee conditions for
the terms and conditions of guarantee.
This product is warranted for a 24-month period
effective from the date of purchase by the
first user.
Damage and/or defects resulting from
inappropriate use also do not fall under the warranty
provisions.
We also disclaim all liability for any bodily injury
resulting from inappropriate use of the tool.
Any transportation costs shall always be borne
by the customer, unless agreed otherwise in
writing
