24
6)Window Open Function
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2.Press “
”
button, the “AUTO” light is on.The appliance is working as smart saving energy
models.(In this function,the appliance is check and record environment temperature in
immediately.It will stop working,when the appliance check the environment are drop
≧
3
℃
.The
user should restart the appliance with “ON/OFF” button)
3..Press “
”
button again, the “AUTO” light is off.Window Open Function is closed.
7)Delay Function
1. This function can be use should be fit two points :
1. the appliance are plug in.
2. before the appliance working.
This function only through by Remote control.
2. Press “
”
button one time, the “Delay” light and ”I/W” light are on. “
two buttons set
the Hours from 01--24(01=1 o’clock,24=24 o’clock...00=Closed ect.)
3. Press “
”
button again, the “Delay” light and ”II/H” light are on. “
two buttons set the
Hours from 01--24(01=1 o’clock,24=24 o’clock...00=Closed ect.)
PS
:Press “
” button,screen shows number will twinkle 5 seconds,you should operate in
time ,otherwise appliance will get back to standby.
(This function is one-time and power off delay function are failure)
8)Child-Lock Function
7.
This function only through by Remote control.When appliance are plug in,this function can
be used in any models.
8. Press “
”
button one time, all lights and LED display are closed ,only “Power” light on.In
this condition, both control panel and remote control are fault use.
9. Press “
”
button again, all lights are on and both control panel and remote control are use
to succeed.
