We congratulate and thank you for choosing Warmhaus wall mounter
boiler which shall provide you heating and domestic hot water comfort for
years. State-of-art Warmhaus boilers, being manufactured in compliance
with standards of the European Union are also exported to many countries.
You can utilize our Authorized Technical Service network with professional
competence certification for any ordinary maintenance needs of this
product produced meticulously with hard work. Our authorized services
assure sustaining performance of the device as they shall always provide
original spare part services. Please read this manual thoroughly to use your
boiler economically, comfortably and efficiently, and store to refer when
needed.
It is recommended for efficient use to have assembly done by an authorized
dealer approved by the local gas authority and which has the competence
and experience for assembly.
1.1. GENERAL WARNINGS
This manual is an integral part of the product, and must be delivered
to the new user in case of handover of the appliance. The manual shall
be preserved properly and kept in the way to be referred as it contains
significant information about use as well as installation of the appliance.
Heating and Domestic Hot Water installations shall be projected
and implemented a competent and approved engineering
company meeting the criteria prescribed by laws, by observing
the current legislation in force.
Installation and maintenance shall be carried out by the
competent personnel having sufficient knowledge in the
installation industry and professional competence certification in
accordance with the legislation in force and in line with the
directions of the manufacturer. Hazards which may cause injury of persons,
other living beings (animals, plants) and damage to goods may be caused
by wrong installation, for which the manufacturer cannot be held
responsible.
Natural gas installation project; shall be carried out by one of the
dealers authorized by your local gas authority.
Attention!
Please note & read the warning and information's on
the boiler. Incorrect operation of the boiler can cause significant
damage.
For Warmhaus wall-mounted boilers; commissioning, adjustment,
maintenance and cleaning must only be carried out by a specialist OR
approved service by Warmhaus!
When faults occur in the heating system, the plant must be stopped and
damaged parts should only be replaced by an authorized workshop.
The accessories used must correspond to the technical rules and the
relevant parts must be approved by the manufacturer in connection with
the Warmhaus wall-mounted boiler.
Only APPROVED & ORIGINAL spare parts should be used.
Bolts sealed with paint strictly forbidden to open !
The boiler must not be used by children younger 8 years or invalid
persons without supervision.
These seals provide evidence that the replacement of bolts required for safe
operation. If the seals are damaged, the guarantee of the device will come
to an end!
1.2. TERMS AND CONDITIONS OF WARRANTY
The manufacturer may not be held responsible for any faults
caused by noncompliance to the legislation and standards in
force and information provided in this manual (and information
and instructions provided by the manufacturer in any case), within or out
of the scope of the contract, and this also constitute reason for
termination of warranty of the appliance.
Only Warmhaus Authorized Service is authorized to carry out
electrical connection of the boiler and to energize the boiler.
In case of any material, design or installation faults occurred within the
warranty period, maintenance and operation shall be carried out without
any charge of labor or spare parts.
(Also see: 3.5 MATTERS TO PAY ATTENTION FOR GUARANTEE
CONDITIONS)
This appliance should only be used for its designed intended
purposes (to be used in closed-circuit heater installation and
production of open circuit domestic hot water production). All
kinds of other uses are not suitable as well as may create a potential danger.
Manufacturer shall not be responsible for damages occurring
due to interventions, false installation and initial starting
performed by unauthorized persons and warranty scope shall
be void. As the Combi is an appliance having heating system, domestic hot
water, natural gas/LPG and electrical connections, do not make and have
any interventions made without the authorized service
This appliance maintenance operations should be performed by
the authorized and competent technical personnel, and
Warmhaus Authorized Technical Service Center's constitute
assurance for quality. WARMHAUS is not responsible for damages arising
from repairs, part replacements and maintenance performed by third
persons and companies and combi remains out of the warranty scope
under such conditions.
This appliance has been manufactured to be installed in the
country specified on its technical registration label. Installing the
appliance in any other country than those specified on the plate
may cause damage or injury to persons, animals and goods.
WARMHAUS declares that Enerwa Plus 1800 H - 2500 H - 3000 H - 3500 H
boilers comply with the essential requirements of the following directives:
- Gas Appliances Regulation (EU) 2016/426
- Boiler Efficiency Directive 92/42/EEC
- Electromagnetic Compatibility Directive 2014/30/UE
- Low Voltage Directive 2014/35/UE
- Ecodesign Directive 2009/125/EC
- Regulation (EU) N. 813/2013 - 811/2013
Manufacturer:
Warmhaus Isıtma ve Soğutma Sistemleri Tic. A.Ş. Bursa
Işıktepe OSB Mah. Park Cad. No:10 16140 Nilüfer-Bursa / Turkey
WARMHAUS
1. DEAR WARMHAUS CUSTOMER
1015 18
24 kW, 28 kW, 33 kW
4
warmhaus.com
