44
warmhaus.com
3.6. RECOMMENDATIONS FOR
ECONOMICAL USE OF COMBI BOILER
Your combi boiler is adjusted at ECO mode for economic
use, we recommend not to change.
Correct Capacity Selection
Heat loss calculation of the combi boiler location should
be made correctly and combi boiler capacity should
comply with this calculation. Devices not having adequate
capacity shall give late responses to heating requests,
devices with higher capacity may cause discomfort and
more fuel consumption as they more frequently opened
and closed. Therefore, combi boiler capacities should be
selected according to the place used.
Insulation
Insulation of your building is the most important item
reducing the heat loss and gas consumption. However, as
your combi boiler has the highest thickness insulation of
its class, heat loss is minimized.
Radiators
Ensure balancing our pressure distribution of your
radiator installation within the house by making reduction
adjustments from radiator valves. Placing furnitures in
front of radiators prevents air circulation and causes
discomfort and more fuel consumption. Reducing
radiator valves of rooms not used for a long period or if
thermostatic radiator valve is used, bringing to the lowest
position then, closing room doors will provide saving.
Domestic Hot Water
Always adjust the domestic hot water temperature
as (38~42 °C). Adjustment of temperature adjuster as
low ensures a considerable power saving. In addition,
high domestic hot water temperatures cause strong
calcification and that negatively affects operation of the
device (for instance, longer heating periods, less flow
rate).
Thermostatic Radiator Valves
You can both acquire savings and comfort by balancing
the heat distribution among the house by using
Thermostatic Radiator Valves.
Room Thermostats
Your combi boiler will operate more economically as
you will have the chance to adjust requested room
temperature according to comfort and economy timings
via room thermostats. Thus, you can adjust temperature
of your room as you wish, and also you can acquire
approximately 6% power saving with every degree of
temperature decrease.
Ventilation
Do not leave windows slightly open for ventilating room/
rooms. In such case, continuous heat loss will occur and
not having any certain improvement in the room air.
Fully opening windows for a short period provides a
better result. Bring thermostatic radiator valves to lowest
position when ventilating rooms.
Cleaning And Maintenance
Attention:
to preserve the boiler’s integrity and keep
the safety features, performance and reliability, which
distinguish it, unchanged over time, you must at least
execute maintenance operations on a yearly basis in
compliance with what is stated in the relative point at
“annual check and maintenance of the appliance”, in
compliance with national, regional, or local standards in
force.
We recommend stipulating a yearly cleaning and
maintenance contract with an authorised local firm.
3.7. ISSUES REQUIRED TO BE
TAKEN INTO CONSIDERATION FOR
WARRANTY CONDITIONS
This warranty given by WARMHAUS does not cover
elimination of failures arising from abnormal use of the
product and also out of the warranty scope for below
given situations
1.
Damages and failures occurring in devices which are
not first started by Warmhaus Authorized Services,
2.
Damages and failures arising from use of the product
contrary to items given in User’s Manual and using out
of its intended purpose.
3.
Damages and failures arising from wrong type
selection,
4.
Damages and failures arising from maintenance
and repairs performed by persons other than our
Authorized Services,
5.
Damages and failures occurring due to transportation,
unloading, loading, storing, external physical (Crushing,
scratches, fractures) and chemical factors following
delivery of the Product,
6.
Damages and failures arising from fire and lightning,
7.
Damages and failures arising from false fuel use and
fuel characteristics,
8.
Low or excessive voltage; unearthed socket usage;
9.
Damages and failures arising from faulty electricity
installations,
10.
Damages and failures arising from failing to perform
timely annual maintenance and cleaning,
11.
Defined periodical maintenance operations by our
Authorized Services,
