17 October 2014
All Dimension are in mm………….Copyright ©
12
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
No : 5
Place the new glass into the door at the bottom.
With a 3mm Allen key, hook under the air dam and lever the top door
retainer up, at the same time slide the glass up and under the top door
retainer. Repeat for the other side.
No : 6
No : 7
No : 8
Slide the glass up and into position, ensure that the
bottom Glass retainer holes are clear to take the
cap screws. Fit the bottom glass retainer.
IMPORTANT NOTE :
Nip up the cap screws for the Top and Bottom glass retainers.
DO NOT OVER TIGHTEN AS GLASS MAY CRACK/BREAK .
NOTE :
Take Care not to Break
Glass .
