8
CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6056
CONTROLLING THE THERMOSTAT
You can control the temperature of the
appliance with the thermostat control. Turn the
dial clockwise to increase the temperature and
anticlockwise to decrease the temperature.
The thermostat provides complete peace of
mind regarding the safety of the appliance and
temperature control, whilst ensuring minimal
energy consumption.
PLACING THE PEBBLES
Randomly place the pebbles in the open bed
of the fire.
CHECK THAT YOU HAVE NOTED ALL THE
FOLLOWING INSTRUCTIONS:
Do:
• Always place the fire in accordance with
this guide. If in doubt obtain expert advice.
• Always make sure the electrical socket is
accessible and located adjacent to, but
not above or behind the fire.
• Always disconnect the fire from the
electrical supply before carrying out
cleaning or maintenance..
• Always assemble the fire in accordance
with this guide. If in doubt, obtain expert
advice.
• Always ensure the product is assembled
in an area that is free from dust, grease or
liquids.
• Always ensure that the correct tools are
used to assemble this product.
Don’t:
• Never leave children unsupervised in a
room where the fire is ON and unguarded.
• Never obstruct or cover the fan outlet or
force items into fire openings.
• Never place or use the fire anywhere
where water is in use, i.e. bathrooms,
kitchens, shower rooms, and swimming
pool etc.
• Never use aerosols or steam cleaners on
or around the fire.
• Never route the mains supply cable under
carpet etc.
• Never place the fire close to curtains or
combustible materials.
• Never use the fire to dry clothes etc.
• Never sit or stand on the fire.
• Never cut the off the plug and hard wire
into a fixed fused spur.
Note:
Any new wiring required, must be in
accordance with local and national codes
and other applicable regulations in order
to reduce the risk of fire, electric shock, or
other injuries.
Note:
When the fire is turned on for the
first time or when it has not been used for
some time, it may release a slight, harmless
odour. This odour is a normal occurrence
caused by the initial heating of the internal
heating elements or dust, and will disappear
with use.
SAFETY CUT-OUT SYSTEM
WARNING!
Please do not obstruct the air vents of the
electric fire.
This appliance has a ‘self resetting’ safety cut
out system. This will activate if the air inlets
or outlets are obstructed. If the Electric Fire is
obstructed, it will overheat. If the temperature
exceeds 85
o
C, the heater element will cut out,
until a safe temperature is regained.