4
Bracket Assembly Instructions (continued)
Plug-In Model Only
Plug the cord into a properly grounded outlet. Do NOT use an extension cord to make the
connection between the towel warmer plug and outlet.
Step 1
Hold the towel warmer in place while tightening the hex-head screws
D
at the base of each
section of tubing
A
using the smaller Allen wrench
L
provided to secure the towel warmer in
place.
Step 2
Make sure the unit is turned on using the ON/OFF switch located at the bottom rail on the
left side (when facing the towel warmer). A light will illuminate the switch when the switch is
turned to the “ON” position. Refer to
Diagram D
for switch location.
Diagram D
Switch
