5
2.2
First using
information
2.3
Models
Installation & user informations
FRONT DISTANCE
: Warmset panels radiate only on the front side.
Make sure there is a minimum distance of 250 mm towards the front
Do not put the heating element before or immediately under an
outlet.
Make sure the plug is accessible after installation of the panels and
that in case of emergency it can be immediately and easily removed
If the heating panel is permanently integrated into an electrical
system, a Category III overvoltage separation device is required
for complete separation. This connection must be made
only
by
qualified personnel.
To connect the
heating
panel to the mains, connect it to a socket in
a correct way, carefully following the
SAFETY WARNINGS.
From the moment of its ignition the speed of the panel is variable
from 5 to 10 minutes depending on the internal temperature of the
operating environment.
During the first use, it is possible to perceive a slight plastic smell in
near the panel. This is not an anomaly, but a normal chemical break
of the paint.
02
Model
Sizes
Power
Weight
W
HP
9
0 x 60 x
1,
3
cm
4
00 W
6
kg
W
HP/S
90 x 60 x
1,
3
cm
400 W
6
kg
