12
GB CONVECTOR HEATER
WITH THERMOSTAT
This guide is intended to help you install and care for your fan heater.
Please read all documentation carefully before installing and using your heater.
Make sure that the air inlet and outlet openings are not blocked. To avoid any risk of fire, do
not cover the heater (ex. With clothes)
Warning / Danger!
Read manual before
use.
In accordance with
essential applicable
safety standards of
European directives
Class I machine
PROTECTION AGAINST OVERHEATING
− An additional fitted safety thermostat protects the heater against overheating and
switches it off automatically. The service lamp then goes out.
− If the device switches itself off, disconnect the mains plug from the socket. The
heater is ready for service again after a short cooling-off phase (approx.15
minutes). Plug the mains plug back into the socket.
− If this repeats itself, first check whether the thermostat switch is set correctly or
if objects hinder the heating operation.
