Heater Location _________________________
Total Wattage __________________________
Place this card in a visible spot close to the consumer unit.
Signed
Date
Company stamp/name
CAUTION
Radiant Floor Heating Systems
Warming-Risk of electric shock
Electric-wiring and heating panels
contained below the floor. Do not
penetrate with nails, screws, or similar
devices. Do not restrict the thermal
emission of the heated floor.
Attention:
Do not cut or shorten the heating element.
Ensure that the entire heating elements including the joints are installed under the tiles
in the installation.
The Heating element must be used in conjunction with a 30mA RCD.
Heater Model
Resistance Before
Resistance After
Insulation Resistance
Pass
Floor sensor resistance
This form must be completed as part of the Warmup Guarantee. Ensure that
the values are as per the instruction manual.
This card must be situated close to the consumer unit in a visible place.
Note: Draw a Plan showing the layout of the heater.
Warmup Plc 702 Tudor Estate Abbey Road London NW10 7UW T: 0845 345 2288 F: 0845 345 2299 www.warmup.co.uk
10
