14
It is important that the following information is recorded on the control card
within the manual:
•
Location Diagrams
•
Distribution of heating circuits and rated power
•
Heater type
•
Dimensions
•
Max operating temp
•
Manufacturer
•
No of heating units installed
•
The area of heating panel(s)
•
Rated power - wattage
•
Surface power density (Total wattage @230Vac)
•
Position / depth of heating units
•
Position of junction boxes
•
Conductor shields
•
Rated voltage
•
Rated resistance cold (ohms)
•
Rated current of overcurrent protection device (fuse)
•
Rated residual current of RCD
•
Insulation resistance – and test voltage used
•
The leakage capacitance
•
Information about materials surrounding wire – if other materials other
than those specified in this manual are to be used you must consult the
manufacture.
This instruction manual contains pages that MUST be completed and fixed at
or near the consumer unit.
Information regarding the product can be found on the technical and product
specification sections on page 4 and on the product label on the panel.
Ensure that those operating the system are provided with all the correct
information and instructions on how to use the heating panels safely.
Installation and System Documentation
Summary of Contents for WHP1
Page 17: ...17 Wall Plan ...
