PAGE 9
74565 Rev. A1
Maintenance & Warranty
MAINTENANCE
Inspect the wire rope and hooks for signs of wear or damage before and after each operation. Worn and
damaged parts must be replaced. Do not attempt to lengthen the wire rope or repair a damaged rope.
Examples of rope damage are as follows: Kinks, cuts, knots, mashed or frayed portions, and broken strands.
Examples of hook damage are as follows: Cracks, twisted components, excessive opening, seat wear, loose
or unclosed safety gate, and corrosion.
Any hook that has twisted components or excessive opening may indicate over-loading of the product.
Contact the WARN Industries Customer Service department to inspect all load bearing components for
damage.
Keep the rope and hooks free from contaminants. Use a clean towel to remove dirt & debris. Using light oil
on the wire rope and hooks can prevent corrosion from forming.
Always use WARN Industries Replacement Parts when the product needs to be serviced. Contact the Warn
Customer Service department to find the proper replacement part numbers (contact information listed in
Warranty section).
WARRANTY
see separate sheet packed with product
-or-
If warranty sheet is lost or misplaced contact:
Warn Industries, Inc.
Customer Service Dept.
12900 SE Capps Rd
Clackamas, OR 97015-8903.
United States:
Phone: 503.722.1200 or (800) 543-9276 (US only)
Fax: 503.722-3000
International:
Phone: 503.722.3008
Fax:
503.722.3005
© 2007 Copyright Warn Industries, Inc. All rights reserved.
