©2021 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
107945A0
I N S T A L L A T I O N I N S T R U C T I O N S
10. Re-attach winch motor cables.
11. Reinstall factory bumper and hardware.
12. Position termination bracket (A3) over fairlead opening,
aligning holes in bracket with fairlead mounting holes.
While holding termination bracket in place, secure the
fairlead and bracket using two M10x25mm socket head
bolts (B3).
13. Install termination strap (A4) to termination bracket as
shown.
14. Install plow flange (A2) to plow mount using included
retaining pins (B4).
A4
Figure 7
Figure 8
Figure 9
