WARN INDUSTRIES
PAGE 2
75331 Rev. A0
PARTS LIST
Part Number
Qty
Description
75240
1
Multi-Mount Frame Kit
63063
1
Hitch Pin and Clip
69847
1
Plug, Quick Disconnect
30510
1
Quick Disconnect Cable, 36” Winch
26405
1
Quick Disconnect Cable, 90” Battery
TOOLS REQUIRED
7/16” Wrench (2)
1/2” Wrench
9/16” Wrench
5/8” Wrench
11/16” Socket Wrench
1/4” Drill bit and Drill motor
Correct wrenches for connection to battery termnal
Safety Glasses
TORQUE SPECIFICATIONS
1/4
8 lb. ft..(10.8 N-m)
3/8
30 lb. ft. (40.7 N-m)
7/16
50lb. ft. (67.8 N-m)
BEFORE YOU BEGIN
The WARN Multi-Mount PowerPlant System is to be used only with a WARN Multi-Mount
Front Receiver or a class 3 receiver hitch. When the winch is used at the rear hitch of a vehicle,
use a 20’ (p/n 32963) or 24’ (p/n 32966) WARN Quick Connect Power Cable to extend forward
to the vehicle battery.
1. Before bolting the winch to Multi-Mount Frame, it is necessary to attach the Quick Connect
Cable to the PowerPlant in place of the long red and black battery cables.
See Figure 1
NOTICE
EQUIPMENT DAMAGE
q
Always
refer to the
I
nstallation and Specification Guide, supplied in the winch kit, for all wiring
schematics and specific details on how to wire this WARN product to your vehicle.
Read installation and operating instructions thoroughly.
