WARN INDUSTRIES
PAGE 1
61285 Rev C0
WARNING
SEVERE INJURY OR DEATH MAY RESULT IF YOU IGNORE ANY OF THE
FOLLOWING.
•
Read the Winch Operator’s Manual, ATV Operator’s Manual, and all warning labels before
operating the winch and ATV.
•
Stay clear of moving parts and cable. Keep others away when operating the winch.
•
Inspect the winch mechanism, fasteners, and cable, before operating. Replace all worn or damaged
parts before operating.
•
Make sure the winch is deactivated when leaving the ATV unattended.
PARTS LIST:
TOOLS NEEDED:
7/16” , 1/2” Socket & Wrench
10mm, 12mm, 13mm, 17mm Socket & Wrench
Phillps-Head Screw-driver
Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
and operating instructions and other information on labels and in this guide. This information alerts you to potential hazards that could
hurt you or others. It is not possible to warn you about all potential hazards associated with this product, you must use your own good
judgment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR
EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND
OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal injury or death.
WARNING
and
CAUTION
are signal words that identify the level of hazard. These signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow recommendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do not follow recommendations.
This guide uses
NOTICE
to call attention to important mechanical information, and
Note:
to emphasize general information worthy of
special attention.
PART NO.
QUANTITY DESCRIPTION
61223
1
REAR RECEIVER BRACKET
61302
1
RIGHT-REAR SIDE BRKT
61281
1
LEFT-REAR SIDE BRKT
780427
4
5/16-18 x 1” U-BOLT
2079
20
5/16-18 HEX NUT
1402 20 5/16
LOCKWASHER
21331
8
5/16-18 x 1” HEX BOLT
22510
2
M8 X 1.25 X 50mm HEX BOLT
3693 3
¼”
SPACERS
61485
1
FRONT RECEIVER BRACKET
61486
1
LOWER SUPPORT BRKT
22491
2
M8 NYLOCK NUT
780428
2
5/16-18 x 1.125” U-BOLT
22508
2
M8 x 1.25 x 25mm HEX BOLT
INSTALLATION INSTRUCTIONS
ATV WINCH MULTI-MOUNT
Multi-Mount Mounting-Kit: PN 61020
Application: KAWASAKI, PRAIRIE 400
