©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
1
105938A0
VR EVO CONTROL MODULE
Removal and Installation Instructions
G E N E R A L S A F E T Y P R E C A U T I O N S
W A R N I N G
IMPACT AND MOVING PARTS ENTANGLEMENT HAZARD
Failure to observe these instructions could lead to severe injury or death
• Always
take time to fully read the Instructions and/or Operations Guide, and/or Basic Guide to Winching Techniques, in order to understand your winch and its operations.
• Never
lean over battery while making connections.
• Never
route electrical cables:
o Across any sharp edges.
o Through or near moving parts.
o Near parts that become hot.
• Always
insulate and protect all exposed wiring and electrical terminals.
• Always
install terminal boots as directed in installation instructions.
• Always
tighten all nuts and bolts securely, per the installation instructions.
• Always
perform regular inspections and maintenance on the plow mechanism, fasteners, cable and related hardware.
• Always
replace all worn or damaged parts before operating.
• Never
operate this WARN product with damaged or missing parts.
Read installation and operating instructions thoroughly.
N O T I C E
EQUIPMENT DAMAGE
•
Always
refer to the Installation and Specification Guide, supplied in the winch kit, for all wiring schematics and specific details on how to wire this WARN product to your vehicle.
Read installation and operating instructions thoroughly.
T O O L S R E Q U I R E D
•
4mm Allen Wrench
•
13 mm Wrench
•
Phillips Head Screwdriver
T O R Q U E S P E C I F I C A T I O N S
Please use the recommended torque specifications when assembling this product unless otherwise specified in the instructions.
FASTENER SIZE
FASTENER TORQUE
FASTENER SIZE
FASTENER TORQUE
lb-ft
(N.m)
M4
(2)
3
1/4"
8
(11)
M5
(4.5)
6
5/16"
17
(23)
M6
(7.5)
10
3/8"
30
(40)
M8
(18)
25
7/16”
48
(66)
M10
(37)
50
1/2"
74
(100)
9/16”
106
(144)
5/8"
148
(200)
3/4”
269
(364)
