©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
105938A0
3. From under base plate, reinstall the four screws to secure
the base plate to the control pack cover.
INSTALL CONTROL PACK TO WINCH
1. Place control pack over tie plate (lining up mounting
holes).
2. Using an Allen wrench, reinstall the four control pack cap
screws to secure control pack to winch tie plate.
3. Mount winch to vehicle per manufacturer’s instructions.
4. Reinstall battery connections.
WARNING
Always connect red (+) power cable ONLY to the positive (+)
terminal of the battery.
WARNING
Always connect black ground (-) power cable ONLY to the negative
(-) terminal of the battery.