Wireless
Control
Activation
Switch
Select
Pairing
Icon
WARN INDUSTRIES
21
FIRST TIME OPERATING INSTRUCTIONS
Pairing the Remote Control
WARNING
Never pair more than one winch and one
remote at a time.
Your Advanced Wireless Remote Control will
arrive already paired to your WARN® ZEON®
Platinum winch system, however, replacement
remotes will need to be paired.
1. To pair the remote to a winch, navigate to the
Pairing Icon and press Select.
2. Press and hold select and the right button
simultaneously for 3 seconds to bring up the
pairing confirmation menu.
3. To continue pairing, select the green check
mark icon by navigating with the left or right
buttons and press Select.
4. After selecting the green check mark icon,
a timer will begin counting down from 30
seconds.
5. During this time, turn the Wireless Control
Activation Switch on the back of the control
pack to OFF and then ON again.
6. If pairing is successful, a green check mark will
appear.
7. If pairing was unsuccessful, the red X mark will
remain, and the remote will remain unpaired.
Select
Right
Button
Select
Thermal
protection
deactivated
Select
Thermal
protection
Icon
Thermal
protection
activated
WARN INDUSTRIES
22
FIRST TIME OPERATING INSTRUCTIONS
8. If pairing was unsuccessful, repeat steps 1-5.
9. To close the pairing panel, press Select.
Thermal Protection Setting
Your Advanced Wireless Remote has a thermal
protection setting, giving you the option to have
the winch shut off automatically when it reaches a
high temperature protection point.
1. To activate the thermal protection setting,
navigate to the thermal Icon and press Select.
2. The thermal protection system defaults as
deactivated.
3. To activate the thermal protection setting, use
the left or right button to highlight the thermal
protection shut-off option. A check mark will
appear in the box. Press select to confirm
selection.
92821A4
92821A4
