WARPP ENGINEERS PVT LTD
36/15,UNIQUE INDL ESTATE ,DHUMAL NAGAR ,WALIV PHATA ,VASAI(EAST)
C NO -8080808734
EMAIL - service@warpp.co.in
6.
INSTALLATION
Once the Rotators are received at your end inspect for proper
condition of the equipment then choose the proper place for
Rotator installation.
Make sure that enough space is there around the machine.
Please note that the vessels will stretch out of the Rotators and
you need to allow space for that as well.
Vessels are loaded on to the Rotators by crane and hence make
sure that position of the Rotator in under the crane.
Lifting by Crane
The Rotator can be lifted by using the two hooks provided at
the end of the chassis. it is desirable that the angle between
the chain & the lifting crane should be 60
̊
. (as shown in figure)