WARPP ENGINEERS PVT LTD
36/15,UNIQUE INDL ESTATE ,DHUMAL NAGAR ,WALIV PHATA ,VASAI(EAST)
C NO -8080808734
EMAIL - service@warpp.co.in
The idler unit basically consist of a base frame with two-wheel
bracket bolted on to the top of it. there are holes drilled
through the top of the base frame so that the wheel brackets
can be positioned at different distances apart, to suit the vessel
diameter.
The drive unit again has two-wheel brackets and similar to the
idler unit these can be positioned to suit the vessel diameter.
Both wheel brackets are motorized.
Note
Self-Centered Rotators will have a lead screw and a hand
wheel .the distance between the two rollers can be adjusted by
turning the hand wheel provided on drive/idler unit.