WARPP ENGINEERS PVT LTD
36/15,UNIQUE INDL ESTATE ,DHUMAL NAGAR ,WALIV PHATA ,VASAI(EAST)
C NO -8080808734
EMAIL - service@warpp.co.in
3.Working condition & Environment
Required
Please make sure that there is enough space around the drive
& idler unit of tank Rotator so that servicing can be carried out.
1)
Please note that this equipment to be installed in a clean
place free from dirt, moisture
2)
Avoid direct exposure to sunlight
3)
Care should be taken to see that it is not exposed to rain
4)
Whenever the machine to be used at a site make sure
proper shade is provided for the machine
5)
Do not keep the machine near oven, furnace where
temperature may be higher and it can affect the
performance of the machine
6)
Always keep the machines at lease with a gap of 300 mm
around the machine as it is required for free circulation of
air
7)
Keep the machine in a flat position
8)
Use cables with proper cross section based on the input
power requirement of the machine (Please refer to
technical specification page for input power of the
machine)