g10fmdl1sm-rev1218
sandpiperpump
.
com
6
• Model G10F
Performance
G10F
SUCTION/DISCHARGE PORT SIZE
1” (25.4mm) NPT
1” (25.4mm) BSP Tapered
CAPACITY
• 0 to 70 gallons per minute
(0 to 265 liters per minute)
GAS DISTRIBUTION VALVE
• No-lube, no-stall design
SOLIDS-HANDLING
• Up to 1 in. (25mm)
HEADS UP TO
• 100 psi or 231 ft. of water
(7 bar or 70 meters)
MAXIMUM OPERATING PRESSURE
• 100 psi (7 bar)
DISPLACEMENT/STROKE
• .10 Gallon / .38 liter
SHIPPING WEIGHT
• Aluminum 48 lbs. (21kg)
• Stainless Steel 79 lbs. (36kg)
40 PSI
60 PSI
80 PSI
10(17)
20(34)
40(68)
30(51)
50(85)
100 PSI
(6.8 Bar)
(2.72 Bar)
(4.08 Bar)
(5.44 Bar)
(1.36 Bar)
100
80
60
40
20
0
0
10
20
30
40
50
60
70
80
0
100
75
50
25
150
125
200
175
225 250 275 300
BAR
0
1
2
7
3
4
5
6
PSI
20 PSI Air Inlet Pressure
Liters per minute
U.S. Gallons per minute
CAPACITY
HEAD
GAS CONSUMPTION
SCFM (M3/hr)
MODEL G10F Performance Curve
Performance based on the following: elastomer fitted pump, flooded suction,
water at ambient temperature. Average displacement per pump stroke: .10 Gallons (.38 Liters).
The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%.
Materials
Material Profile:
Operating
Temperatures:
Max.
Min.
FKM:
(Fluorocarbon) Shows good resistance to a wide range
of oils and solvents; especially all aliphatic, aromatic and
halogenated hydrocarbons, acids, animal and vegetable oils.
Hot water or hot aqueous solutions (over 70
°
F(21
°
C)) will
attack FKM.
350
°
F
177
°
C
-40
°
F
-40
°
C
Nitrile:
General purpose, oil-resistant. Shows good solvent, oil,
water and hydraulic fluid resistance. Should not be used with
highly polar solvents like acetone and MEK, ozone, chlorinated
hydrocarbons and nitro hydrocarbons.
190
°
F
88
°
C
-10
°
F
-23
°
C
Maximum and Minimum Temperatures are the limits for which these materials can be operated.
Temperatures coupled with pressure affect the longevity of diaphragm pump components.
Maximum life should not be expected at the extreme limits of the temperature ranges.
Metals:
Stainless Steel:
Equal to or exceeding ASTM specification A743 CF-8M for corrosion
resistant iron chromium, iron chromium nickel and nickel based alloy castings for
general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
For specific applications, always consult the Chemical Resistance Chart.
CAUTION!
Operating temperature limitations are as follows:
MODEL SPECIFIC
UNIVERSAL ALL AODD
1: PUMP
SPECS
