WINCH MANUAL
IMpORTANT SAFETY INSTRUCTIONS
4
WARNING
Keep children away. Children must never be allowed in the work area,
Do not let them handle machines, tools, extension cords or operate
this tool.
WARNING
Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
CAUTION
Dress properly. Do not wear loose clothing or jewelry as they can
be caught in moving parts. Protective, electrically non-conductive
clothes and non-skid footwear are recommended when working.
Wear restrictive hair covering to contain long hair.
WARNING
Never route electrical cables across sharp edges or near parts that
get hot.
WARNING
Use eye and ear protection. Always wear impact safety goggles.
CAUTION
Maintain this hoist with care. Keep this tool dry and clean for
better and safer performance. Follow instructions for lubricating
and changing accessories. Inspect hoist rope periodically and,
if damaged, have them replaced immediately by an authorized
technician. The handles must be kept clean, dry, and free from oil and
grease always.
Disconnect or unplug remote switch when not in use.
DANGER
Stay alert, watch what you are doing, use common sense. Do not
operate any tool when you are tired.
DANGER
Never apply load to rope hook tip or latch. Apply load only to the
center of hook.
DANGER
NEVER
use hoist to secure a load during transport.
WARNING
Check for damaged parts
. Before using this hoist, any parts that
appear worn or damaged should be carefully checked to determine
that it will operate properly and perform to its intended function.
Check for damage including alignments, binding of moving parts;
mounting fixtures. Any part that is damaged should be properly
repaired or replaced by a qualified person. Do not use the tool if any
switch does not turn “On” and “Off” properly.
WARNING
Replacement parts and accessories.
When repairing or servicing,
only use identical replacement parts. The use of any other parts will
void the warranty.
WARNING
Do not operate tool if under the influence of alcohol or drugs.
Read warning labels on prescription to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not
operate the tool.
WARNING
Be certain the hoist is properly bolted to a structure that can hold the
hoists maximum rated load.
Do not use inappropriate attachments to extend the length of the
hoist cable.
WARNING
Do not apply any loads to the hoist when cable is fully extended past
the safety mark. Keep at least 5 full wraps of cable on the spool,
(Usually marked red on the hoist cable at the drum end.)
After moving any piece of equipment with the hoist, secure the the
equipment in place. Do not rely on the hoist to hold for an extended
period of time nor whilst in transport, hoists are not securing device,
By doing so will void any warranty
CAUTION
Examine hoist before using. Components may be affected by
exposure to chemicals, salts, and rust.
Use gloves while handling cable.
WARNING
Never operate hoist if cable shows any signs of weakening, such as
knotting or kinking. If it does you must replace immediately.
Summary of Contents for EH800-CAD
