12
6. Safely rewind cable onto the drum (for the first five wraps be careful not to allow
kinking). Cable must be wound onto the drum under a load of at least 10% rated
line pull.
WARNING -
Only replace the wire rope with the identical replacement part
recommended by the manufacturer.
1.
MAINTENANCE
1.
Periodically check the tightness of mounting bolts and electrical connections.
Remove all dirt or corrosion and always keep clean.
2.
Do not attempt to disassemble the gear box.
3.
The gearbox has been lubricated using a high temperature lithium grease and is
sealed at the factory. No internal lubrication is required.
