Wärtsilä JOVYTEC L 6kVA
– 10kVA BAX 3297_en
- 24 -
The function and condition in which the UPS unit currently finds itself is displayed over 5 LED in the
function panel.
7. ON
:
This LED lights green if the UPS is switched on
8. ON-LINE
:
This LED lights green both in UPS mode and in
bypass mode and also signals that there is an
voltage at the output.
9.
ON-BAT
:
This LED lights yellow for battery operation (power failure)
10. BYPASS
:
This LED lights yellow if the UPS unit is running in
bypass mode
11. FAULT
:
This LED lights red if there is an internal error in the UPS,
and an acoustic signal is emitted. Press any key in the function panel and the
alarm will be switched off. The cause of the alarm is shown in the display.
7.2
Parameters
Indicator
Function of the indicator
O/P VOLT = 230.0V
Output voltage of the UPS
O/P FREQ = 50,0Hz
Output frequency of the UPS
I/P VOLT = 230,2V
Input voltage of the
UPS
I/P FREQ = 50,2Hz
Input frequency of the UPS
BAT VOLT = 240V
Battery voltage of the battery
O/P LOAD% = 80%
Utilisation of the UPS as a percentage
O/P W = 7000W
Output in Watts
O/P VA = 10000VA
Output in VA
O/P CURR = 43A
Output current in A
BACKUP TIME = 5Min.
Autonomy time for the current loading
BAT CHARG = 80%
Battery charge level in percent
TEMPERATURE = 28°C
Temperature of the UPS
BAT PACK NUM = 2
Number of battery packs used
RATING = 10000VA
Nominal value of the UPS in VA
CPU VERSION 3.12
CPU software
