00A. Risk Reduction
00A.1
General
Read the engine manual including this appendix before installing,
operating or servicing the engine and/or related equipment.
Failure to follow the instructions can cause personal injury, loss of life
and/or property damage.
Proper personal safety equipment, e.g. gloves, hard hat, safety
glasses and ear protection must be used in all circumstances.
Missing, imperfect or defective safety equipment might cause seri-
ous personal injury or loss of life.
This appendix contains listed general identified hazards, hazardous
situations or events, which are to be noticed during normal opera-
tion and maintenance work.
Identified hazard,hazardous situation or
event
Chapter of engine manual
3
4
8 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Dropping parts during maintenance work
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Turning device engaged during maintenance
work
1)
x
x
x
x
x
x
x
x
Crankcase safety expl. valves will open if crank-
case explosion
x
x
x
Noise level
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Running engine without covers
x
x
x
x
x
x
x
x
x
x
In case of major failure, risk of ejected parts
x
x
x
x
x
x
x
x
Contact with electricity during maintenance
work if power not disconnected
x
x
x
x
x
x
x
Electrical hazard if grounding of electrical equip-
ment is incorrect
x
x
x
x
x
Ejection of components / high pressure gas due
to high firing pressures
x
x
x
x
x
x
x
Risk of ejected parts due to break down of turbo-
charger
x
x
Overspeed or explosion due to air-gas mixture in
the charge air
2)
x
x
x
Ejection of fuel injector if not fastened and crank-
shaft is turned
x
x
x
Engine rotating due to engaged gear box or
closed generator breaker during overhaul
x
x
x
x
x
x
x
x
Fire or explosion due to leakage on fuel / gas line
or lube oil system
x
x
x
x
x
x
Inhalation of exhaust gases due to leakage
3)
Continues
x
x
x
200343
Risk Reduction
Appendix A
00A - 1
Summary of Contents for PAAE051728
