3
RECOMMENDATIONS
The following recommendations are designed to ensure that the device always functions reliably:
• Never open the casing! To do so would expose you to the risk of an electric shock. Should repairs prove necessary, leave
them to qualified service personnel.
• Avoid dust and high moisture levels, direct sunlight and extremely high or low temperature.
• Safeguard the device from excessive vibration. Always place the unit on a stable and horizontal surface.
• See to adequate ventilation. The device should not be placed on soft surfaces (carpet, cushions, etc.). When mounting
it in a rack, make sure that the rear and lateral cooling vents remain unobstructed.
• Avoid leaving the unit near radiators or other objects producing heat.
• Internal components should only be adjusted or cleaned by qualified service technicians. Ensure no object or liquid
penetrates the device through its cooling vents.
• When replacing a fuse make sure you fit in one of identical value!
Have the device examined by a qualified service technician in the following cases:
• the mains lead or mains switch have been damaged,
• objects or liquids have penetrated the device,
• it has been exposed to excessive moisture,
• malfunctions or abnormal operating conditions have occurred,
• the device has been dropped or the casing damaged.
Congratulations on the purchase of the new Warwick combo. Please read through these instructions
before connecting and operating the device. If you keep to the guidelines set out in this manual, you will
soon be able to appreciate the quality of this new Warwick amplifier. Please keep this instruction boo-
klet handy in case you need to consult it again. Please send the PASSPORT to the address indicated the-
rein.
HINTS
- This apparatus shall not be exposed dripping or splashing and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.
- This apparatus should be connected to a MAINS socket outlet with a protective earthing connection.
- Mains plug or appliance connector shall be used as the disconnect device, so mains plug or appliance connector should
always remain readily operable.
- If the apparatus shows any malfunction, immediately disconnect the main power cord from the mains socket.
- Do only operate effects pedals in-between the instrument and the amplifier, as these devices are not designed for the
supplied load of an effects loop.
- Remove the plug whenever changing a fuse.
- Only ever replace a fuse with another of the same type. Never bridge defective fuses.
- Make sure the top and bottom of the device are properly ventilated and that the vents are not blocked.
- Do not subject the device to excessive vibration or hard jolts as these could damage the device.
- Don't undertake repairs yourself.
- Only allow the case to be opened by qualified personnel. (Remove the plug).
- Repairs should only be undertaken by qualified personnel.
SHOULD YOU FIND YOURSELF ONE DAY WONDERING: "WHY IS THERE NO SOUND COMING OUT?"
please check:
- all stub cables,
- all connections of these cables
and proceed anew by following the guidelines of the chapter GETTING STARTED. Possibly the problem reveals to be an
operational error.
