Charging
1. Fully Charge the battery for six hours before first use.
2. To charge, connect the DC end of the supplied 26 volt adapter to the
battery charging port and plug the AC side cable into the wall outlet.
3. The Battery -Level Indicator is flashing regularly when the device is
charging. It will stop flashing and remain fully illuminate when full charge.
4. The battery can be charged at any time and at any battery- level. But it
cannot be turned on when charging.
5. The battery is exhausted to less than 5% (the first left Battery -Level
Indicator LED flashes) and needs to be recharged.
6. The average running time is about 4 hours depending on the speed level
and pressure during use.
Operating
1.Press and hold the ON/OFF Switch for more than 3 second to turn the
device to the level 1 speed. Twice to turn the device to level 2 speed and
three times for level 3 speed. Each press of the button will increase one
level until the level 5 speed. Press the button in 6th times to enter the
standby mode (battery level indicator light on), the battery-level indicator
lights will show the corresponding battery level. Press and hold again to
turn the device to level 1, and each press to add one level.
2. Under any speed level, press and hold can close the device.
Product Parameters
Use a slightly damp towel to clean device and a dry with a soft cloth.
For storage or travel, store the device in supplied portable bag.
Due to continuous product improvement, we reserve the right to
change the product specification without prior notice.
Thank you for purchasing our product, which has been made to meet
high quality standards. The manufacturer's warranty covers the product
for a period of 12 months from the date of purchase against
manufacturing faults.
Warranty
Operating Instruction
Product name:Vibration Massage Device
Interface type:DC26V /1A
Size: 188*62*242mm
Weight:1kg/2.2lbs
User:For Adult use
Model:520B
Rate Voltage: 100-240V, 50-60Hz
Lithium-Ion Battery Capacity: 2550mAh
Charge:4 hours
Use environment:0~40℃,Not waterproof
6
7
3. In the standby state, press and hold to directly shut down, 15 seconds
without operation will automatically shut down.
4. The device will stop running after 10 minutes of continuous use for
intelligent protection. Restart again if you use it again after the device shut
down.
Summary of Contents for 520B
Page 6: ...8 ...