29
30
Chapter 5
BLUETOOTH SETTINGS
See Chapter 3 for step-by-step setup instructions.
Scan the “Set Connection” barcode before pairing the WWS250i Scanner and the internal Bluetooth adaptor. Scanner LED light will turn
blue when attempting to connect/reconnect via Bluetooth, LED will then turn green and blink to indicate successful pairing.
Connect and Disconnect
Bluetooth Power Off Settings
Numeric Barcodes
Set Connection
Set Minute (Range 00-60)
Set Second (Range 00-60)
Disable Timeout
This option controls the length of time that the Bluetooth radio will stay powered on when not in use.
The timeout is 3 minutes by default, and is programmable to the second and minute, ranging from 10 seconds (00:10) to 60 minutes and
60 seconds (60:60)
For example, to set the timeout as 5 minutes 30 seconds:
1. Scan [Set Minute]
2. Scan [0] & [5] on below numeric barcode table.
(Range: 00-60)
3. Scan [Set Minute]
4. Scan [Set Second]
5. Scan [3] & [0] on below numeric barcode table.
(Range: 00-60)
6. Scan [Set Second]
POWER OFF TIMEOUT
1
2
3
4
5
6
7
8
9
0
WIRELESS SCANNER SETTINGS
GROUP-24
Variable Timeout
No Timeout (Scanner Always On)
*.B030$*
. B030$
SET MINUTE
*.B029$*
. B029$
SET SECOND
*.B021$*
. B021$
DISABLE
TIMEOUT
The timeout is 3 minutes by default, and is programmable to the
second and minute, ranging from 10 seconds (00:10) to 60
minutes and 60 seconds (60:60)
For example, to set the timeout as 5 minutes 30 seconds:
1. Scan [Set Minute]
2. Scan [0] & [5] on below numeric barcode table.
(Range: 00
~
60)
(Range: 00
~
60)
3. Scan [Set Minute]
4. Scan [Set Second]
5. Scan [3] & [0] on below numeric barcode table.
6. Scan [Set Second]
NUMERIC BARCODES
POWER OFF TIMEOUT
1
2
3
4
5
6
7
8
9
0
WIRELESS SCANNER SETTINGS
GROUP-24
Variable Timeout
No Timeout (Scanner Always On)
*.B030$*
. B030$
SET MINUTE
*.B029$*
. B029$
SET SECOND
*.B021$*
. B021$
DISABLE
TIMEOUT
The timeout is 3 minutes by default, and is programmable to the
second and minute, ranging from 10 seconds (00:10) to 60
minutes and 60 seconds (60:60)
For example, to set the timeout as 5 minutes 30 seconds:
1. Scan [Set Minute]
2. Scan [0] & [5] on below numeric barcode table.
(Range: 00
~
60)
(Range: 00
~
60)
3. Scan [Set Minute]
4. Scan [Set Second]
5. Scan [3] & [0] on below numeric barcode table.
6. Scan [Set Second]
NUMERIC BARCODES
POWER OFF TIMEOUT
1
2
3
4
5
6
7
8
9
0
WIRELESS SCANNER SETTINGS
GROUP-24
Variable Timeout
No Timeout (Scanner Always On)
*.B030$*
. B030$
SET MINUTE
*.B029$*
. B029$
SET SECOND
*.B021$*
. B021$
DISABLE
TIMEOUT
The timeout is 3 minutes by default, and is programmable to the
second and minute, ranging from 10 seconds (00:10) to 60
minutes and 60 seconds (60:60)
For example, to set the timeout as 5 minutes 30 seconds:
1. Scan [Set Minute]
2. Scan [0] & [5] on below numeric barcode table.
(Range: 00
~
60)
(Range: 00
~
60)
3. Scan [Set Minute]
4. Scan [Set Second]
5. Scan [3] & [0] on below numeric barcode table.
6. Scan [Set Second]
NUMERIC BARCODES
POWER OFF TIMEOUT
1
2
3
4
5
6
7
8
9
0
WIRELESS SCANNER SETTINGS
GROUP-24
Variable Timeout
No Timeout (Scanner Always On)
*.B030$*
. B030$
SET MINUTE
*.B029$*
. B029$
SET SECOND
*.B021$*
. B021$
DISABLE
TIMEOUT
The timeout is 3 minutes by default, and is programmable to the
second and minute, ranging from 10 seconds (00:10) to 60
minutes and 60 seconds (60:60)
For example, to set the timeout as 5 minutes 30 seconds:
1. Scan [Set Minute]
2. Scan [0] & [5] on below numeric barcode table.
(Range: 00
~
60)
(Range: 00
~
60)
3. Scan [Set Minute]
4. Scan [Set Second]
5. Scan [3] & [0] on below numeric barcode table.
6. Scan [Set Second]
NUMERIC BARCODES
