fig 7.3.1 c
fig 7.3.1 d
INTRODUCTION
© WASP S.r.l.
56
Ordinary and extraordinary maintanance
7.3. Extraordinary maintenance
ATTENTION:
Extraordinary maintenance operations must be carried out by the Manufacturer’s Technicians or
by maintenance personnel who have been instructed and authorized by the Manufacturer.
Any of these operations not carried out by a manufacturer’s technician can cause irreversible
damage to the machine or its parts and therefore renders the warranty null and void.
Extraordinary maintenance interventions are those that are carried out:
• On the occasion of exceptional events, such as revisions;
• Stopping due to breakage of mechanical or fluid parts;
For additional information, support and FAQs on our website: www.3dwasp.com/support
7.3.1. Removing core from Zen X Extruder
1. WIth machine turned on use “Autohome” command from menù PRINT>AUTOHOME
2. Perform the removal of the filament as described in paragraph 5.3 “First start”
3. Turn off the machine
4. Remove the velcro band
5. Remove the PTFE pipes by pushing down the crowns and pulling up the pipes
6. Unplug the connector
7. Remove the OOZE SHIELD as described in paragraph 7.2.6 “Replacing Ooze shield protection”
8. Unscrew and remove the two central-external fixing screws when holding with strenght the extruder block
itself
9. Remove the extruder block from the extruder carter
After a core replacement is recommended to perform the Autocalibration (see paragraph 8.2 Autocalibration).
Summary of Contents for 4070 ZX
