background image

35

Wasp Bar Code products are warranted against defects in workmanship and
materials for a period of one year from the date of shipment, provided that the
product remains unmodified and is operated under normal and proper
conditions.

This warranty is limited to repair or replacement at Wasp Bar Code's option,
with reasonable promptness after being notified. These provisions do not
prolong the original warranty term for any product which has been repaired or
replaced by Wasp Bar Code.

This warranty applies to the original owner and does not extend to any
product which has been subject to misuse, neglect, accidental damage,
unauthorized repair, or tampering.

No other express warranty is given. The replacement or repair of a product is
your exclusive remedy. Any other implied warranty of merchantability or fitness
is limited to the duration of this written warranty. Some states, provinces, and
countries do not allow how long an implied warranty lasts, so the above
limitation may not apply to you.

In no event shall Wasp Bar Code be liable for consequential damages. S o m e
s t a t e s, prov i n c e s, and countries do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations may not apply to yo u .

Warranty Information

If you experience any problems with Wasp WLP 4170 CCD Scanner that you
are unable to resolve, call for technical assistance at (214) 547-4100, Monday
through Friday, 8:00 AM - 5:00 PM Central Standard Time. Our web site is 

www.waspbarcode.com

You may also contact us in writing at:

Wasp Technologies
1400 10th Street
Plano, TX  75074
(214) 547-4100
(214) 547-4101 Fax

Product Support

Summary of Contents for WLP 4170 CCD









































Reviews: