12
Intercharacter Delay Settings
00
Slowest
01
Slow
02
Default
50
Medium
75
Fast
99
Fastest
The 'Intercharacter Delay' configuration sets the speed at which the WLP 4170
CCD Scanner sends data. The intercharacter delay should be changed only if the
transfer rate cannot be maintained between WLP 4170 CCD Scanner and the
keyboard buffer of the computer.
Note:
The default for the intercharacter delay is set to '2ms' and is the most
common configuration; however, your PC may be different. When you scan a bar
code, if some characters are missing, decrease the intercharacter delay speed to
speed up the transfer rate. If some stray or scrambled characters appear on your
screen, increase the intercharacter delay to slow down the transfer rate.
Note:
For help in configuring these settings, consult the programming steps on
page 5.
Begin
Set Intercharacter Delay
Exit
Chapter 5
Intercharacter Delay
