8
UPPER/LOWER CASE & BEEP SETTINGS
• Caps Lock Auto (For PC XT/AT only):
In Auto Trace mode, the scanner will keep track of the Caps
Lock status automatically. For some PCs, the scanning
performance may be compromised because of the auto tracing.
If the scanning performance is poor (or cannot scan) or the
scanner cannot output the upper/lower case characters correctly,
try to select one of the next two choices instead of auto tracing.
• Caps Lock Off:
When the keyboard is in the unshifted state (Caps Lock is not
pressed), select “Lower Case.”
• Caps Lock On:
When the keyboard is in the shifted state (Caps Lock is on),
select “Upper Case.”
Caps Lock On
Caps Lock Off *
Caps Lock Auto
*Default
QSG
The ‘Beep’ configuration supports the general control options for the Wasp
WLR8950 Scanners. The High, Low and Med settings refer to the tone of
the beep, not the volume.
Beep Off
Beep Settings
Beep High
Beep Med*
Beep Low
