WPA 1200 II Users’ Guide
15
2. Insert the SD card with the notched corner
as shown by the icon on the case.
3. Push the card into the slot until you feel the SD card click into place; this
will signal that the card is properly seated within the slot. The card is
secure when it is not protruding from the slot. The SD compartment cover
can be screwed back into place when a SD/MMC card is inserted.
Removing a Storage Card
1. Remove the two screws from the SD compartment cover and remove the
cover.
2. Press the card in and release. The card pops out.
3. Remove the card from the slot.
Using the Laser Scanner
The WPA1200 II has an integrated laser scanner that reads all major bar code
labels with excellent performance.
NOTE:
Reading software must be enabled in order to operate the scanner.
This can be a user-loaded application or a pre-loaded utility such as
Scanner Setting or Scan2Key.
Activate the laser scanner by pressing
either one of the trigger keys located on
the left and right side of the unit.
The WPA1200 II has a built-in Scanner
Setting utility that allows you to test the
device’s bar code scan function.
