WPA 1200 II Users’ Guide
20
After the program has finished installing
you see the following screen.
9. Click Finish. You may be prompted to restart your computer.
After you have installed ActiveSync and restarted your computer, the
ActiveSync icon
appears in your computer’s system tray as shown, and
ActiveSync Connection Wizard starts. For detailed information on how to use
ActiveSync on your computer, start ActiveSync then click Help
→
Microsoft
ActiveSync Help.
Connecting the Device to Your Computer
1. After ActiveSync has been installed, connect the USB charging cable to
the universal connector on the bottom of your device. If necessary,
connect an adapter. Refer to Connecting the WPA1200 II to a PC on page
9.
2. Plug the other end of the USB charging cable into a USB port on your
computer.
3. Turn the device ON.
4. ActiveSync starts automatically and configure the USB port to work with
the WPA1200 II. The New Partnership setup wizard will automatically
start.
NOTE:
If ActiveSync doesn’t start automatically, click Start
→
Programs
→
Microsoft ActiveSync.
If a message appears indicating that it is unable to detect a
connection, click the Cancel button and manually configure the
communication settings.
5. Follow the onscreen instructions.
