background image

 

Warranty Certificate 

Product type: 

 

Stamp and signature: 

Serial number: 

Date of purchase: 

 

 

In pursuit of service enhancement and simplification of communication with customers, the company Waspper s.r.o. recommends its 
customers, who purchase this product, to register their product via the  manufacturer's website: www.waspper.com. This registration 
will provide inevitable data for faster processing of your complaints or consulting relevant to purchasing of spare parts and accessories. 
This registration enables the customer to avoid further procedures, as submitting of the purchase receipt or the warranty certificate. 

1. 

The manufacturer - Waspper s.r.o. - is liable for inherent defects of the product purchased, if such defects become evident within the 

warranty period. Application of claims for repairs under warranty requires completion and submission of the complaint form via the 
manufacturer's website: www.waspper.com. The product is covered by a full warranty of 24 months for private customers (as defined 
by the Civil Code) and 12 months for corporate customers (as defined by the Commercial Code). The warranty period commences upon 
completion  and  submission  of  the  complaint  report  via  the  website  in  case  of  simple  defects  and  damages.  The  commencement  of 
warranty in case of major defects starts upon the product delivery to the manufacturer's address: Waspper s.r.o, Duklianska 51, 05201 
Spišská Nová Ves. Acceptance of complaint will be notified to the customer using the contact details entered in the complaint form.  

2.

  The  warranty  does  not  cover  defects  incurred  due  to:  wrong  operation;  improper  handling  or  use  contradictory  to  the  operation 

manual  or  instructions  and recommendations from  the  company Waspper s.r.o;  use or  storage of goods within inappropriate areas, 
especially with respect to temperature, dust formation or ambient humidity; exposure to direct sunlight; damage attributable to natural 
disasters  of  force  majeure.  The  warranty  does  not  apply  to  mechanical  damages,  any  damages  due  of  solid  particles,  frost  or  other 
weather effects. The warranty does not apply to damage to the pump caused by cavitation. Other exemptions from warranty include 
damages to the engine due to lack of oil and ingress of any other but operating fluid among internal engine components.  

3. 

Particular steps of claims processing will be notified to the customer following assessment of the scope of repair by the claims engineer. 

Whenever the replacement of a damaged component can be performed by the customer, the latter will receive a relevant spare part 
only. If the repair by a servicing centre is inevitable, the customer is obliged to mail the damaged device to the manufacturer's address. 
The device must be complete (including accessories) and packed properly to prevent its damage during transport, it must be free of 
mechanical damage and contain no operating fluids. If the goods submitted to the servicing centre shows evident signs of damage or 
excessive wear, the manufacturer reserves the right to reject such consignment without acceptance. 

4. 

Claims for repairs under warranty oblige the customer to provide the receipt of purchase (invoice, cash receipt) together with the 

warranty  certificate  and  written  description  in  support  of  their  claim,  including  photographic  documentation.  It  is  recommended  to 
complete the complaint form via the manufacturer's website to ensure the fastest processing of the claim as possible, if the manufacturer 
acknowledges  such  claim  as  justified,  the  repaired  item  will be sent to the customer and the postage/freight will be covered  by  the 
manufacturer.  

5. 

If the claims engineer finds out the product does not comply qualifications for repair under warranty, the claim will be considered 

unjustified and the costs of product transport to the customer will be paid by the latter. 

6. 

Should the repair period exceed 30 days or if the product is irreparable, the customer will be offered a replacement item. 

7.

 Justification of claims will be assessed by the claims engineer at the manufacturer. Justified claims will extend the warranty period by 

the period taken by the claim processing period. Such action will be confirmed to the customer by means of a document in writing, 
dispatched  together  with  the  product  or  sent  via  e-mail.  If  the  product  subject  to  claim  contains  any  discontinued  component,  the 
manufacturer  will  provide  the  customer  with  an  adequate  replacement  item  with  its  parameters  corresponding  with  the  returned 
product or even better.  

8. The customer undertakes to read all the information found on the packaging or in the operation manual; to do so immediately following 
the product delivery, to acknowledge that preservation of the positive characteristics of the product delivered will be subject to its proper 
operation and storage. Any disregard to obligations defined herein relieve the company WPW Center s.r.o. from any liability for defects 
of goods or damages incurred due to breach of this obligation by the customer or any other third party. The customer is obliged to check 
the intact condition of packaging and product during the purchase and takeover of the consignment from the postman. Any damage to 
the packaging must be reported to the carrier and recorded immediately. Any damages found only after unpacking of the product must 
be notified to the distributor within the maximum period of 4 working days. No later claims for product damage can be accepted. 

 

Summary of Contents for WP15











Reviews: