background image

 

5

Hazard 

Danger 

Risk of Electrical Shock 

What can happen 

How to prevent it 

Spray directed at electrical outlets or 
switch, or objects connected to an 
electrical circuit, could result in a fatal 
electrical shock 

Unplug any electrically operated product before 
attempting to clean it. Direct spray away from 
electric outlets and switches. 

 
 

Hazard 

Danger 

Risk of fluid injection 

What can happen 

How to prevent it 

Your washer operates at fluid pressures and 
velocity high enough to penetrate human 
and animal flesh, which could result in 
amputation or other serious injury. Leaks 
caused by loose fittings or damaged hoses 
can result in injection injuries. Do no treat 
fluid injection as a simple cut! See a 
physician immediately 
 
Injuries can result if system pressure is not 
reduced before attempting maintenance or 
disassembly. 
 
 

Never place hands in front of nozzle 
Direct spray away from self or others 
Make sure hose and fittings are tightened and in 
good condition. Never hold onto the hose or 
fittings during operation. 
Do not allow hose to contact muffler 
Never attach or remove lance or hose fittings 
during while system is pressurized. 
 
To relive system pressure, shut off engine. Turn 
off water supply. and pull gun trigger until water 
stops flowing. 
Use only hose and accessories rated for pressure 
higher than your pressure washer’s PSI 

 

Hazard 

Danger 

Risk of injuries from spray 

What can happen 

How to prevent it 

High Velocity fluid spray can cause objects 
to break. Propelling particles at high speed.
 
 
Light or unsecured objects can become 
hazardous projectiles. 

Always wear approved safety glasses. 
Wear protective clothing to protect against 
accidental spraying. 
 
Never point lance at people or animals. 
Always secure trigger lock when lance is not in 
service to protect accidental operation 

Summary of Contents for WR67160














Reviews: